Outer Limits 4x4 Board

I have just gotten a small char lynn orbi valve for one of my buggy projects, it has had water in it and sat for a while, am I going to be able to get it rebuilt or is it a lost cause? I can only spin the spud shaft a quarter of the way round then it siezes.

they are pretty basic inside mate.

Pull it down and give it a quick rub with some 1200grit wet&dry then oil all the parts then put it back together.

i wouldnt think the seals are hard to get either. just match em up

took it to the yydro shop today, they say its too far gone

Should have taken it to the "Hydro" shop not the "Yydro" shop. They may give you a better outcome.

fat fingers, little keys.

Rhett
make sure you know and mark each peice when you pull it apart.... some if put back together will be come a motor and not a pump.....and when you go to turn the steering wheel it will continue to spin.
Who make it whats the model i may have rebuild instructions at work for it