what is the easy way to fix this but 4wd high is fine and 2wd
and i know the easy way of fixing it not using low rang but i want to use low range
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
low range
Moderator: GUtripper
low range
I have just installed a jks body lift to my tj wrangler and now when in low range it jumps out unless u hold it there
what is the easy way to fix this but 4wd high is fine and 2wd
and i know the easy way of fixing it not using low rang but i want to use low range
what is the easy way to fix this but 4wd high is fine and 2wd
and i know the easy way of fixing it not using low rang but i want to use low range
Re: low range
If you look at the linkage there is a small plastic block with a bolt in it - this is intended for adjusting the shifter.
If that doesn't work to your satisfaction then the ideal solution is to ditch the crappy factory design that mount half on the body & half on the t/case - to a kit like one from SkyJacker that mounts purely from the transfer case.
If that doesn't work to your satisfaction then the ideal solution is to ditch the crappy factory design that mount half on the body & half on the t/case - to a kit like one from SkyJacker that mounts purely from the transfer case.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Re: low range
Thank you Wooders
that did the trick was a little bit of fiddle n around now to just test it on the weekend
that did the trick was a little bit of fiddle n around now to just test it on the weekend
Who is online
Users browsing this forum: No registered users and 1 guest