I am doing the head gasket on my 3rz and checked the clearances today before removing the head to find all of the exhaust valves are between 0.001 and 0.004in ...way too tight
Just wondering if any of you guys have bought the replacement shims, can I only get them from toyota and how much are they?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3rz valve shims
Moderators: toaddog, Elmo, DUDELUX
Re: 3rz valve shims
if you don't want genuine, most engine reconditioners keep them it stock or you can have yours machined.
98 GU Ti 4.5 Auto Turbo LiLPG
O2 Auto Sports
1/25 Norfolk Ave
South Nowra NSW
o2autosports@bigpond.com
0244230977 0414873727
O2 Auto Sports
1/25 Norfolk Ave
South Nowra NSW
o2autosports@bigpond.com
0244230977 0414873727
Re: 3rz valve shims
you can measure thickness's of each shim and swap them around into other spots to get the right clearances to save a few bucks, the others can just be machined.
Who is online
Users browsing this forum: No registered users and 1 guest