Sorry if this is in the wrong section, or otherwise improper. I admit to only skimming the rules...
What I'm looking to find is if a set of rear axle brake backer plates from a Paj or Monty with rear disc would fit on a 1990 Gen2 V6 MightyMax truck. If someone could post a few pics and/or measure the bolt pattern on the backers it would be a great help.
I'd measure myself but my local yards are fresh out of Mitsubishi anything...
TIA!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Paj/Monty brake backing plates on gen2 MightyMax, doable?
Moderator: -Scott-
Paj/Monty brake backing plates on gen2 MightyMax, doable?
Walt
89 Power Ram 50 /w no engine
88 Power Ram 50 2.6 long bed
90 Power Ram 50 V6 <-- under the knife, getting a Daimler-Benz OM617 I5 NA Diesel
Some people have nothing but ideas. Go do it.
89 Power Ram 50 /w no engine
88 Power Ram 50 2.6 long bed
90 Power Ram 50 V6 <-- under the knife, getting a Daimler-Benz OM617 I5 NA Diesel
Some people have nothing but ideas. Go do it.
Who is online
Users browsing this forum: No registered users and 0 guests