Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Will 15x8 -19 rims fit on a solid axle lux/cruiser diff with no drama's.
Stock is -22 right? so 3mm more in..
Diffs are going under a custom sierra, so other type of clearance isnt a problem as wherever they rub, is being cut... Less offset is also not a problem.
I'm Just worried about the hub arms for steering, calipers and heat/rock sheilds
Thanks toyota peoples.
Last edited by BlueSuzy on Sun Nov 28, 2010 8:41 am, edited 1 time in total.
The rubber boot on the end of the tie rod would go very close to the rim to the point that a balancing weight on the rim might hit it. They clear OK with the -26 rims I have.
Might come very close. My top steer arm will be flipped and will be away from the rim, the bottom bundera arms dont come near tierods. Unsure with other lux/cruiser.
