Outer Limits 4x4 Board

Hey all,

Will 15x8 -19 rims fit on a solid axle lux/cruiser diff with no drama's.

Stock is -22 right? so 3mm more in..

Diffs are going under a custom sierra, so other type of clearance isnt a problem as wherever they rub, is being cut... Less offset is also not a problem.

I'm Just worried about the hub arms for steering, calipers and heat/rock sheilds

Thanks toyota peoples.

:( Noone has a stock lux or old disc front crusier with stock surasiers and can tell me how much room left they have to the steering arm? :(

Thanks guys..for nothing.

maximum room is 95mm backspace until you hit the steering arm. So about minimum -18mm offset.

The rubber boot on the end of the tie rod would go very close to the rim to the point that a balancing weight on the rim might hit it. They clear OK with the -26 rims I have.

Might come very close. My top steer arm will be flipped and will be away from the rim, the bottom bundera arms dont come near tierods. Unsure with other lux/cruiser.