Outer Limits 4x4 Board

Hi all, 

I'm looking to stretch the wheelbase of my FJ73 MWB cruiser and was wondering the maximum length the front diff can be pushed out before having front shaft or steering issues...

And if anyone knows how far the rear ca go out that would be great as well. I am planning on using a tailshaft spacer in the rear?? 

What I want to do is drill the spring perch or flip the springs...

Any help would be greatly appreciated!

Cheers, Ian

My rear is back ~15mm from standard, no issues and no tailshaft spacer. My front is ~35-40mm forward, with large offset rims on turning my 35'' tyres hit the front body mounts.

Thanks mate.
The current plan is to throw a 60 series housing in the rear, and some ifs hub spacers in the front...
Than maybe a set of 35's

Thanks for the info.

Ian

thats the same setup I have.

How's it go set up like that?
I've been meaning to do a few things for a while... Lol

Its a good setup that is not to difficult to install. Done a 60 series front diff into a middy too and that is alot of work. More room for big rubber in the rear.

would you guys be able to point me in the right direction to photos
of set up 73 & 74 series
cheers
Gordon

what kind of photos do you want?

bar work and stuff set for comp

thinking about bringing The Mule (my middy) out of retirement and giving her a make over
just want to see some photos for motivation
cheers

Heres some of my pics

all good just been over on ih8mud
some inspiration there
thanks
out to the shed

Just wondering what size lift your running hulsty ?

1'' Body and about 2-3'' in the springs unloaded, cut front guards.