Outer Limits 4x4 Board

Hey guys,
Got a couple of questions about a gen 1 4runner.

Firstly, can anyone tell me how this trim around the window comes off?
The piece that runs along the bottom of the window and up the front edge, in a backwards L .
I have a replacement part for the other side (thats rusty) and it looks like it screws in from inside the car, but from inside there are no screws to be found?



Secondly i haven't had much luck in the classifieds ( http://www.outerlimits4x4.com/viewtopic ... 0&t=218296" onclick="window.open(this.href);return false; ) looking for a front bumper cap, but have found a later model surf bumper.
I need a complete bumper on the car for rego, but i have barwork planned so it's only a short term thing.
Will a new (~91)surf front bar bolt straight up to an old (85) 4skinner and look ok?

This is what im after anyway:



Thanks
Nic

Just use brute force nic or otherwise we can snatch it off......lol. Hurry up and finish so we can go for a wheel, and also congratulations on joining the toyota club. You don't have to hang around dave now lol.

James

94lux wrote:congratulations on joining the toyota club. You don't have to hang around dave now lol.

haha good call.
Shouldn't be long now, just a couple of fiddly bits and and its on the road and going straight to the big M.
Then probably straight home to weld the diffs.

Do you have an old bullbar?

dad wrote:

94lux wrote:congratulations on joining the toyota club. You don't have to hang around dave now lol.

haha good call.
Shouldn't be long now, just a couple of fiddly bits and and its on the road and going straight to the big M.
Then probably straight home to weld the diffs.

Do you have an old bullbar?

Don't have to hang around me???? Were you trying to say will not keep up with me???? You lux boys would only slow me down Hey James have you passed the basic wheelen test yet? Nick I think he needs to see Prado your way Anyone ever seen a fourby mount a tree????

Hey Nick talk to Tim (Jame's mate) he got that complete gen1 with the V8 in it he is scrapping the body it may have a bumper.

Also Dave (black bull) has that bent hilux bull bar at his place you can put on to pass rego. HAHAHAHAHAHAHA what are you worried about getting it past rego anyway????? I told you to look after the rust and I will take care of the rego.

Hey nic nah i sold my old bullbar when i got my tube one, tim bought black bulls old one then sold it when he got his tube one lol. Just knock up a cheap tube one like the roll cage you did or keep a look out on ebay. Tim picked up another one the other day for his old lux for $100 and it was only missing mounts which were easy as to knock up. Looks schmick! And dave this is a toyota section so maybe you should leave the talking to the big boys....

Not sure about the Surf bumper fitting, but I scored a front bumper off a 2wd LN106 from the wreckers, for $30, and the mounts were pretty much the same as mine, and it fitted up nicely, I have chopped the corners off to make room for the 35s.
Ive had no dramas with rego checks, well with the bumper anyway.

Check out the wrecking yards and see what you can find.
Or borrow one from someone near you to get through rego.

Ok so i don't REALLY need it for rego, but it would be nice...

Dave: Pete has a guy locally that will do it, but its not ready yet anyway...



edit

94lux wrote:And dave this is a toyota section so maybe you should leave the talking to the big boys....

Big boys??? from memmory your still running 33s or 35s??? come step up to the 38+ and some real diffs not those little lux ones and we will see and remember we have all seen you with your pants down FABIO WITH A LITTLE BOY hahahahahah

Just wanted to fill your inbox. I'll take it off now.