Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo 3b motor injecter pump

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 13
Joined: Thu Sep 17, 2009 8:12 am
Location: gladstone

turbo 3b motor injecter pump

Post by old fella »

i turbo my 3b motor, how do i screw up injecter pump to give more fuel, does the vacum lines to injecter pump have anything to do with giving more fuel. or do you adjust the speed senser screw ? i can.t get much more than 2500 rpm out of motor at present.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: turbo 3b motor injecter pump

Post by hulsty »

The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Re: turbo 3b motor injecter pump

Post by shorty_f0rty »

hope you have a pyro when you do this. boost guage would help too.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Posts: 13
Joined: Thu Sep 17, 2009 8:12 am
Location: gladstone

Re: turbo 3b motor injecter pump

Post by old fella »

have pyrometer and boost guage, blow off valve is set for 10 pound, pyrometer at present is only going to 500 towing car trailer up hills,than drops off quickly when you back off, going to ajust screw tomorrow afternoon, being talking to a old diesel fitter he is going to help me set it up, let you now how it goes.
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests