Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series kaymar rear wheel carrier.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 67
Joined: Wed Mar 18, 2009 7:55 am
Location: BRISBANE

80 series kaymar rear wheel carrier.

Post by nic80 »

Hi guys

I recently purchase a second hand Kayman rear wheel carrier for my 80 series.
All the nuts bolts and brackets were just thrown in a box when I picked it up.

After an hour of scratching my head... Couldn't figure out how the hell it all works.
Has anyone got instructions or has posted a thread on how to fit this bloody thing?

Any help is much appreciated!

Thanks
GQ Middy, TD42, GU diffs, 4 link, locked, Walkers, 37's, 6 pt Cage, Gigglepin, 24v system, garmin etc..
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series kaymar rear wheel carrier.

Post by TheBigBoy »

There is a bracket (with welded nuts) with a long skinny steel bit on it. That slides into the inside of your chassi. The long bit is to line it up and hold it in place. The other bracket sits on the outside of your chassi. Locate and drill 2 holes in your plastic bumper down from top. 2 big long curved plates bolts into the 2 top and 2 bottom holes. Its not that hard. It seems like you got a box extra's aswell.

Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 5 guests