Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear spring flip on a 40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 3
Joined: Fri Sep 10, 2010 10:35 am

rear spring flip on a 40

Post by just_Josh »

have been trying to find info on flipping the standard rear springs on a 77 fj40. looks like if i fit larger tyres they'l rub on the front of the wheel well when flexing. from what i have gathered, i can flip the springs under the following conditions:

1. shock mounts move to behind the cross-bar by grinding the welds and flipping the through-bolts.
2. the diff pinion will point down. this is a weaker configuration, though i imagine the risk of breaking is reduced as it is not lifted.
3. i will need a spacer at one end of the prop shaft to make up the new distance.

if this is all correct, can anyone comment on whether or not this job is worth doing? any experiences appreciated.
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: rear spring flip on a 40

Post by vk7ybi »

To flip the springs youll need to get the drive shaft retubed, or shorten one from a 60 or 70. Spacers wont get you enough. You will need a new rear brake flex hose. You gain about 3.5 inch wheelbase.
In stock configuration, the axle is located by the stronger shorter side of the spring pack, but many many people have flipped packs and no problems.
Youll need to cut sheet metal to get the wheel centred in the arch when the axle is moved back.

When I fitted my 33s and 35s, I just redrilled the spring perch on the axle and moved it back 1.5 inch.. This was plenty to clear the tyres on suspension compression.. I have the stock brake line and drive shaft.. There is enough engagement on the slip joint for it to not be a problem, but I'll eventually install a spacer to prevent premature slip joint wear.

Another option is to install 55 rear springs.. These are longer and have a centred pin. Adjustments to the shackle length or hanger position need to be made to make these work..
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: rear spring flip on a 40

Post by bad_religion_au »

you will notice a hell of alot more axle wrap.

a better modification is to fit up longer rear springs (i.e. fj55 rear springs), or use springs that have a centred spring pin (i.e. fj55 or Hj75 front springs)
Spit my last breath
Posts: 3
Joined: Fri Sep 10, 2010 10:35 am

Re: rear spring flip on a 40

Post by just_Josh »

thanks guys, redrilling sounds pretty good for my needs. vk7ybi was there any issue with the shock mounts?
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: rear spring flip on a 40

Post by vk7ybi »

The rubber bushings are deformed a bit, but thats about all.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest