Page 1 of 1
Advice for Sydney purchase
Posted: Mon Dec 13, 2010 9:48 pm
by fetpeset
Sorry if this is boring to y'all...
Looking for low km's Jap import engine for 93 Vitara G16B. In NSW (2560), any1 recommend anywhere to get & even install.
Was told to get a new clutch kit done too - any other recommendations?
THANKS IN advance ! x
Re: Advice for Sydney purchase
Posted: Tue Dec 14, 2010 11:20 am
by weaves
I would strongly reconmend replacing timing belt, timing tensioner, water pump, cam, front timing and rear main seals. Just because its easier while the engine is out and its piece of mind
Re: Advice for Sydney purchase
Posted: Tue Dec 14, 2010 5:13 pm
by V.W.Dave
I aggree with weaves on this one. Unless you know the complete history of the engineand you KNOW it has all been done. Be carefull with the import engines they are not always that good..... I would shop around $3200 is not that bad for a shop price but you can get cheaper.
Re: Advice for Sydney purchase
Posted: Sat Jan 08, 2011 4:24 pm
by zukmeista
Re: Advice for Sydney purchase
Posted: Sun Jan 09, 2011 9:52 pm
by lay80n
He has been farked off
Layto....
