Outer Limits 4x4 Board

I've heard a vicious rumor that the TD 80's had a bigger diameter filter?? is this true? If so would it offer better/similar flow than my K&N (the k&n is only 17 cm across, a std 4.5 filter is 22cm across)

thanks guys

Hi
is it worth running the k&n air filter?? There not cheap

Do the 100's and 80's run the same size filter? it's definitely true for the 100 series, the turbo diesel filter offers about 25% more surface area and fits straight into the standard airbox.


This is the difference between the 1FZ/1HZ and TD filters for the 100 series.

The difference in dimension is:
1Hz Filter: 220mm Diameter
Turbo Filter 255mm Diameter
Height of both filters is the same at 145mm

tas80 wrote:Do the 100's and 80's run the same size filter? it's definitely true for the 100 series, the turbo diesel filter offers about 25% more surface area and fits straight into the standard airbox.


This is the difference between the 1FZ/1HZ and TD filters for the 100 series.

The difference in dimension is:
1Hz Filter: 220mm Diameter
Turbo Filter 255mm Diameter
Height of both filters is the same at 145mm

the 100 filters wont fit as they have a solid bottom in them, u can cut the bottom out of them and they will fit (sorta)

thanks tho Syksey

tas80 wrote:Do the 100's and 80's run the same size filter? it's definitely true for the 100 series, the turbo diesel filter offers about 25% more surface area and fits straight into the standard airbox.


This is the difference between the 1FZ/1HZ and TD filters for the 100 series.

The difference in dimension is:
1Hz Filter: 220mm Diameter
Turbo Filter 255mm Diameter
Height of both filters is the same at 145mm

Your decking boards are on upside down....

Cranky, 3f 1hz 1hdt and 1fz use the same filter, dont know about the 24valve td though, but probably still the same.

RED60 wrote: Your decking boards are on upside down....

lol, most of the houses in my street were built by the same builder...........we all have upside down decks

tas80 wrote:

RED60 wrote: Your decking boards are on upside down....

lol, most of the houses in my street were built by the same builder...........we all have upside down decks

It's a tassie thing. Most decks I've seen down here they r that way up! Lol

If you are in doubt go to http://www.rycofilters.com.au" onclick="window.open(this.href);return false; and use their online catalogue. There is dimentions and pics there