Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wiring arb lockers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 24
Joined: Fri Jul 10, 2009 5:34 pm
Location: bathurst

wiring arb lockers

Post by stimpy »

hi all i was woundering if any one could tell me how to wire up my aie lockers so i do not have to lock the rear in to use the front thanks
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Re: wiring arb lockers

Post by thehanko »

there is a wire that piggy backs from the rear switch to the front, un plug this wire from the front switch and put a 12 v positive ignition wire to it.

job done.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: wiring arb lockers

Post by Willy Hilux »

Just splice the + power from the rear switch to feed the front.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 61 guests