Intake manifold cleaning

Post by **ledgend80** » Sat Jan 01, 2011 9:50 am

as the title says i am looking at getting an intake manifold cleaned inside and out. does anyone know what would be the best way to clean it out. i was thinking something like a bead bath where you put the parts into a vibrating hopper full of beads. but was also looking at trying to get as much oilo that has soaked into the casting out as possible.

preferbably in the brisbane area.

Post by **guzzla** » Sat Jan 01, 2011 10:02 am

When I removed mine, I gave it a pretty good clean using those $2cans of Export degreaser from Supercheap (best degreaser ever I recon). But I ended up taking it to my engine builder with the rest of the engine and they put it in the hot tank (which is safe for soft metals like alloy and brass). I couldn't believe how good it came up, it looked just like new again. I doubt an engine shop would charge much just to hot tank a manifold so it might be worth asking around.

Post by **Struth** » Sat Jan 01, 2011 10:21 am

Find your local engine shop and get them to bath it, maybe $50, but you will know it is cleaned properly.

Cheers

Post by **turbo gu** » Sat Jan 01, 2011 12:30 pm

buy some Subaru upper engine cleaner and soak it with that

Post by **chunks** » Sat Jan 01, 2011 3:41 pm

Hot tank it.

You could get the outside bead blasted but I wouldn't recommend it for the inside, the beads like to get lodged in hard to reach places and can end up going through your motor.

Post by **ledgend80** » Sat Jan 01, 2011 4:53 pm

been on the web and found a couple of places one that does ultrasonic and another that does hot tub and ultrasonic. will have to give them a call monday.
cheers for the info so far.

Post by **RED60** » Sat Jan 01, 2011 8:57 pm

Just double check on any "hot tub"type cleaners... while they are hot they also sometimes use alkaline solutions to clean stuff... this solution MAY actually attack your manifold alloy material.....

Post by **MICK77** » Sat Jan 08, 2011 2:45 pm

turbo gu wrote:buy some Subaru upper engine cleaner and soak it with that

X2

I use it for heaps of things. It will strip all shit from alloys without damaging it.

It is also excellent for rusted and seized bolts / nuts. Just spray a little on, go have a smoke & a beer, come back ( with another beer) and undo it.

Cheers,

Micko

Post by **MUD80D** » Sat Jan 08, 2011 9:12 pm

just take it off and put it through the missus dish washer those power ball tablets work well on alloy parts

Post by **ledgend80** » Sat Jan 08, 2011 9:39 pm

doesn't help it when i am the dishwasher

Outer Limits 4x4 Board

Intake manifold cleaning

Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Re: Intake manifold cleaning

Who is online