Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Auto Transmission Oil Temp Gauge

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 3
Joined: Thu May 27, 2004 5:20 pm
Location: Auckland, NewZealand

Auto Transmission Oil Temp Gauge

Post by Kiwi Alan »

I am interested in installing an oil temp gauge in my 1993 GQ with an auto transmission.
I do have oil coolers fitted already.
Should it be fitted on the oil return pipe into the gearbox just after the oil cooler as my gearbox service centre recommended or on the hot outlet side?
Which is the best location for it?

Newbie from New Zealand
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: Auto Transmission Oil Temp Gauge

Post by chimpboy »

Kiwi Alan wrote:I am interested in installing an oil temp gauge in my 1993 GQ with an auto transmission.
I do have oil coolers fitted already.
Should it be fitted on the oil return pipe into the gearbox just after the oil cooler as my gearbox service centre recommended or on the hot outlet side?
Which is the best location for it?

Newbie from New Zealand


I'd say hot side for sure - that way it shows the actual temperature in the transmission.

Jason
This is not legal advice.
Posts: 50
Joined: Thu Jun 17, 2004 8:52 pm
Location: Bayswater, Victoria

Post by Extreme_Trans »

Jason you should always measure eth heat at it's hottest point and not at it's coolest. That's only going to tell you were doing 2-3 minutes ago and that just to late. You want to know how hot your transmission is getting. Fit it to the out going cooler union.
Regards
Rodney
Rodney Hudson-Davies
Wholesale Automatic Transmissions
Factory 1/58 Barry St
Bayswater
Victoria 3153
Phone 03-97628004 5 days a week
Mobile 0415393755 7 days a week
rodtina@optusnet.com.au
www.automatictransmissions.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests