Page 1 of 1
Ln106 VP V6 to ECO V6 wiring?
Posted: Sun Jan 16, 2011 8:18 pm
by luxembuger
G'day, I've got an Ln106 running a series 2 3.8 V6 and wouldn't mind updating to a later model V6, Ecotech for example. Just wondering what the difference in wiring is between the two different donks? Also I'm running a manual 5 speed which I wish to retain...
All helpful hints are appreciated!
Cheers, Chris.
Re: Ln106 VP V6 to ECO V6 wiring?
Posted: Sun Feb 20, 2011 1:34 pm
by Frankenyota
How did you go with this?
I was told you can use an ecotech motor with the computer and wiring loom from a VN, VP commodore with some small mods. eg hooking up the map sensor as ecotech runs an AFM.
Did the ecotech have a alloy sump?
I was going to look further into this swap when my motor dies, and i'm hoping the sumps swap over.
Cheers
Matt
Re: Ln106 VP V6 to ECO V6 wiring?
Posted: Sun Feb 20, 2011 2:52 pm
by stock 4runner
I know if you had a vr motor and loom you can put a vs ecotec in using all standard wireing.