Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wastegate actuator CT20 for a 4Runner 1988 LN61 2L-T

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 34
Joined: Wed Nov 17, 2010 9:06 pm

wastegate actuator CT20 for a 4Runner 1988 LN61 2L-T

Post by tmike »

Hey guys....can somebody tell where i find a wastegate actuator for the CT20....my car is an import from japan.

I think its broken cause my red led in the dash comes up(overboost), overheating problems when its ligthing up....and sometimes a noisy sound from the wastegate actuator....so maybe someone can help me...second hand or new...it doesnt matter...

thanks a lot

Maik
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Re: wastegate actuator CT20 for a 4Runner 1988 LN61 2L-T

Post by thehanko »

try blowing into the actuator pressure line, if you can blow through it then the diaphragm is going and your going to over boost.

i went second hand, your could try toyota but it will be pricey. try any wrecker which might have surfs in it. they do vary a bit so best to eye ball it to make sure it will fit yours.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 34
Joined: Wed Nov 17, 2010 9:06 pm

Re: wastegate actuator CT20 for a 4Runner 1988 LN61 2L-T

Post by tmike »

thx for anwer...

are there difference between the wastegate actuators from the CT20????
Post Reply

Who is online

Users browsing this forum: No registered users and 108 guests