what would be the best way to go for a full ecu/ignition setup for a 3.9
im have about $1500 to spent and im thinking of going a full megasquirt system with edis coil packs(do it once do it right)
and who sells the megasquirt in aus or do i just get it from uk
is it also worth getting different injectors
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
megasquirt/haultech
Moderator: Micka
megasquirt/haultech
This is a block of text that can be added to posts you make
Re: megasquirt/haultech
How much do you want to do yourself?
For trigger wheels and EDIS setup look at this website:
http://trigger-wheels.com/store/" onclick="window.open(this.href);return false;
They also do assembled megasquirt kits for rover v8 but they charge a bucket load for them.
If I were to go megasquirt I'd be going the V3 DIY kits from:
http://www.diyautotune.com/catalog/index.php" onclick="window.open(this.href);return false;
(US Based and cheaper than the places I've seen in the UK)
For closed loop tuning I have the DIY wideband o2 kit from tech edge (has simulated narrowband which I'm going to feed into the 14cux) but the only advantage that has over the innovate kits is the data logging which megasquirt can probably do anyway. So to save a bit of messing about you could get the innovate kit from the above joint for a reasonable price atm with the exchange rate.
For trigger wheels and EDIS setup look at this website:
http://trigger-wheels.com/store/" onclick="window.open(this.href);return false;
They also do assembled megasquirt kits for rover v8 but they charge a bucket load for them.
If I were to go megasquirt I'd be going the V3 DIY kits from:
http://www.diyautotune.com/catalog/index.php" onclick="window.open(this.href);return false;
(US Based and cheaper than the places I've seen in the UK)
For closed loop tuning I have the DIY wideband o2 kit from tech edge (has simulated narrowband which I'm going to feed into the 14cux) but the only advantage that has over the innovate kits is the data logging which megasquirt can probably do anyway. So to save a bit of messing about you could get the innovate kit from the above joint for a reasonable price atm with the exchange rate.
-Scott- wrote:Isn't it a bit early in the day to be pissed?
Who is online
Users browsing this forum: No registered users and 4 guests