Would anyone have a wrecked chasis, or the mounts laying around. Wanting the two mounts that are welded to the chasis. Getting reading to pull the 3lt engine and drop the turbo diesel in.
Thanks
John
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD 4.2 chasis /engine mount
Re: TD 4.2 chasis /engine mount
Hello John
I'm thinking of doing the same I have the vehicle looking for a motor and all the other bits, as I have just started looking I have been chasing info on what needs to be done at this stage from what I have found so far you will need more then engine mounts you will need the hole front end, wiring harness, tailshafts and maybe the dash. I’m searching the wreckers for a complete right off as the best option on having all the parts I need to swop over
Best of luck with you search
I'm thinking of doing the same I have the vehicle looking for a motor and all the other bits, as I have just started looking I have been chasing info on what needs to be done at this stage from what I have found so far you will need more then engine mounts you will need the hole front end, wiring harness, tailshafts and maybe the dash. I’m searching the wreckers for a complete right off as the best option on having all the parts I need to swop over
Best of luck with you search
Re: TD 4.2 chasis /engine mount
Mate, I am fortunate. I have the lot, including the complete loom, dash etc.
Just had someone ring a few wreckers, around $100.00 for chasis mount for both. Thought I woul get a pair cheaper off a bent chasis but no luck. I am told the 4.2 petrol is the same mount???????? Also I guess the 4 bolt and 2 bolt model will be different also and you would need to know what mounts will be on the motor your getting
Johno
Just had someone ring a few wreckers, around $100.00 for chasis mount for both. Thought I woul get a pair cheaper off a bent chasis but no luck. I am told the 4.2 petrol is the same mount???????? Also I guess the 4 bolt and 2 bolt model will be different also and you would need to know what mounts will be on the motor your getting
Johno
Who is online
Users browsing this forum: No registered users and 4 guests