Page 1 of 1

TD 4.2 chasis /engine mount

Posted: Wed Feb 23, 2011 7:23 pm
by johno
Would anyone have a wrecked chasis, or the mounts laying around. Wanting the two mounts that are welded to the chasis. Getting reading to pull the 3lt engine and drop the turbo diesel in.

Thanks
John

Re: TD 4.2 chasis /engine mount

Posted: Sun Feb 27, 2011 7:05 pm
by Sharp
Hello John

I'm thinking of doing the same I have the vehicle looking for a motor and all the other bits, as I have just started looking I have been chasing info on what needs to be done at this stage from what I have found so far you will need more then engine mounts you will need the hole front end, wiring harness, tailshafts and maybe the dash. I’m searching the wreckers for a complete right off as the best option on having all the parts I need to swop over
Best of luck with you search

Re: TD 4.2 chasis /engine mount

Posted: Mon Feb 28, 2011 9:27 am
by johno
Mate, I am fortunate. I have the lot, including the complete loom, dash etc.
Just had someone ring a few wreckers, around $100.00 for chasis mount for both. Thought I woul get a pair cheaper off a bent chasis but no luck. I am told the 4.2 petrol is the same mount???????? Also I guess the 4 bolt and 2 bolt model will be different also and you would need to know what mounts will be on the motor your getting

Johno