Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

75 series suspension help

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 3
Joined: Sun May 31, 2009 7:25 pm
Location: wodonga

75 series suspension help

Post by ltissy »

I'm looking at upgrading the suspension on my ute want to fit 35" tyres on and was thinking of fitting a 3" lift kit on

Want to get more flex don't carry much loads. Have seen the drop shackles and want to customize a suspension kit or does anyone know of a good flex kit on the market.

Any ideas or suggestions on how to go about it would be appreciated

Thanks Tissy
Posts: 18
Joined: Wed Oct 07, 2009 10:49 pm
Location: perth

Re: 75 series suspension help

Post by 666mademedoit »

2 inch dobinwon springs, go for there light duty set up and remove the second stage from the rears and you've got a fairly cheap fairly flexi combo. With 25mm longer front shackles and 50mm longer rears those springs will give you enough flex to lift am rear tire about a metre keeping the other 3 wheels firmly planted... longer shocks in the rear are a must to get complete droop. This sort of setup will keep your car fairly low and stable, if more clearance for bigger tires is needed don't be scared to fire up the angle grinder!!!!!!!!!!!! :armsup:
Posts: 3
Joined: Sun May 31, 2009 7:25 pm
Location: wodonga

Re: 75 series suspension help

Post by ltissy »

Thanks for the advice will look into it
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests