Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dual Cab Roll Cage Help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 246
Joined: Tue Oct 06, 2009 4:43 pm
Location: Central Coast

Dual Cab Roll Cage Help

Post by unmass »

Hi guys just having drama's trying to find specs and or pics on internal roll cages for gq dual cab. Currently want to start competing and I need a minimum of 6 point roll cage internal or external with 4 point racing harness. So need help deciding on whether to go internal or external with an internal taxi bar?

So I have tried searching and can find schematic pics of a full body rig and a single cab ute but no dual cab. It needs to be either cams or ccda approved. I have all the tube and tooling to do the cage just want to do it right the first time.

Also does a cage need to be TIG or MIG welded to the floor plates? Any pics and advice would be greatly appreciated disclose number plates if concerned of DOT. As some people freak out about undercover DOT employees.

Also having no luck with previous links to ccda website so I have search but have had no luck

Thanks in advance guys

Regards
Brooksy
Mitch@mitchellbros4x4.com.au
"If you are gonna live life on the edge u better have some good balance"
Posts: 116
Joined: Fri Feb 02, 2007 4:46 pm
Location: maryborough QLD

Re: Dual Cab Roll Cage Help

Post by nisson35 »

i dont know where you can find pictures or dimensions but on the arb xtreme winch challenge site has specifications on the welds and mounting plates. As for internal or external, i would lean towrds internal fully registerable in all states then
YOU CAN FOLLOW ME BUT ITS GUNNA HURT!!
Posts: 838
Joined: Sat Nov 11, 2006 10:01 am
Location: SPRINGMOUNTAIN BRISBANE

Re: Dual Cab Roll Cage Help

Post by pigletracing »

got a 6point in my dual cab. the main crusafix (cross frame stregnth) is behind the back seats. I have a second crusafix behind the front seats that the harnesess go over the sholder height cross (as per specs) I have made the centre crusafix removable, so the car has 2 crusafixes 1 non removable & a second removable for when I have people on the back seat.
The truck will be on display & taking spectators on hot laps at the Briz 4X4 Show in april wiz in & have a look,
or come into TJM Coopers Plains (briz) as it lives there.

cheers piggy
DAIHATSU FEROZA UTE,V6,caged,lokd 35's
NOW SOLD
& then
GQ DUAL CAB TUFF UTE,caged,lokd,35's
NOW SOLD
& then
JK WRANGLER 4 DOOR TUFF TOURER,lifted,lokd, 35s
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests