Hi,
First post for me. Im a bit stuck and would like some advice.
I have two h55 gearboxes and transfers from 60series landcruisers and Im trying to get one of them to fit into my hj47 troopy.
Gearbox 1 is a 1984 hj60 with a manual transfer shift lever but it has water damage inside and the gears are beyond repair.
Gearbox 2 is a 1986 hj61 with the vacume type transfer shift but this unit will not fit into a hj47 as it is too wide.
what I want to know is can I take all the gears etc out of Hj61 transfer 2 (vac operated) and put them into hj60 tranfer 1 and still have a functioning manually operating transfer case for my hj47?
Any advice would be appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
H55f transfer swap hj61 hj47
Moderators: toaddog, Elmo, DUDELUX
Re: H55f transfer swap hj61 hj47
you can convert a vaccum operated transfer to a manual operated.
you have to drill a hole etc for the detent ball/spring, and use the shifting shafts from a manual gearbox.
there is a guide on ih8mud that shows how to do it.
you have to drill a hole etc for the detent ball/spring, and use the shifting shafts from a manual gearbox.
there is a guide on ih8mud that shows how to do it.
03 HDJ100R GXL / 94 FJ45-80
Resident Terrorist
Re: H55f transfer swap hj61 hj47
To answer your question, yes you can as long as both transfer cases have the same thickness idler shaft.
Who is online
Users browsing this forum: No registered users and 0 guests