Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power assisted 80 series clutch?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 166
Joined: Tue Mar 04, 2008 4:04 pm
Location: SW Victoria

Power assisted 80 series clutch?

Post by djroberts »

Ok, so after seeing people from here talking about this in the past i want to find out who's done a power assisted clutch conversion on their standard 80 clutch?

I have priced the booster assembly and it is going to cost around the $900 mark :shock: So thought i would ask the outers oracle?

Are there parts i can use from a donor vehicle (like an hj61 with hydro) or am i better to trawl the wreckers?

I will detail the information in this thread as i progress as there appears to be no surplus of information on this particular topic.

Cheers, D.
loose as a goose
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: Power assisted 80 series clutch?

Post by oldmate »

Never seen a thread that ended with a finished setup myself.

I just went with an auto :finger:

But there is a clutch booster on some 80 series. I've seen them on sahara models. Good luck finding one though. 60 series had them too, might be more common but not a direct fit.

And when you say stanard 80 series cluch do you mean a bog stock standard? Because a good quality clutch, ie genuine or exedy won't need a booster.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 166
Joined: Tue Mar 04, 2008 4:04 pm
Location: SW Victoria

Re: Power assisted 80 series clutch?

Post by djroberts »

Well I guess there is a first for everything?

I've got an hj61 donor car and i think fitting the power assist would be a massive hassel.

Let's see how i go ... :silly:

Btw auto's are for girls :finger:
loose as a goose
Posts: 166
Joined: Tue Mar 04, 2008 4:04 pm
Location: SW Victoria

Re: Power assisted 80 series clutch?

Post by djroberts »

Ok, so many thanks to 80's_Delerious i have managed to attain all items necessary for the vacuum boosted clutch for the 80 series.

Instead of itemising all the parts I will let the picture do the talking:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

It seems like a pretty straight forward enough installation. I will need to drill the holes for mounting the booster to the firewall and probably a bit of line work but that should be all.

For other people wanting to do the same thing as this i have got the workshop manual from here http://daemon4x4.org/portal/downloads.php?dcid=17&p=3" onclick="window.open(this.href);return false;

There appears to be a check valve in the system that is different between the diesel and petrol models, i may end up having to change this.

After looking through the manual there appears to be no surplus of information regarding the vacuum reservoir?! Makes it difficult to determine exactly what' going on inside it. There is also what appears to be a pressure switch threaded into the tank which i guess is for a low vacuum pressure (or high, depends which way you look at it) indicator light on the dash?!?

So that's where i am at. The v8 gets mounted first before i start drilling holes for the booster.
loose as a goose
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests