Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Auto for 1HZ 75 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Auto for 1HZ 75 series

Post by killalux »

Hi all,
My Dad is wanting to put an auto in his 1HZ powered 75 series troopy.
We were thinking the auto from a 1HDT powered 80 series would be the best bet as its a full hydrulic box, no electrics to worry about.

Has anyone done this swap. Will the extra length of the auto box cause ant drama's other than modifiying crossmember? Will the 75 series t-case bolt up to the auto.

Thanks
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Posts: 404
Joined: Sun Jan 11, 2009 6:39 pm
Location: serpintine wa

Re: Auto for 1HZ 75 series

Post by hillbilliywheelchair »

new crossmenber and longer front with a shorter rear tailshaft and i used a 60 series shifter
thanks jono
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests