looking to convert my manual windows to eletric in my 7x series
has any one does this before
what parts are needed
how do you go about wiring the system up
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Any one converted the crank windows to pwr in the 7x series
Moderators: toaddog, Elmo, DUDELUX
Re: Any one converted the crank windows to pwr in the 7x ser
hans't been done yet but my brother got a set of bundera doors to get all the mechanisms out of, think he picked up the pair of doors for $50.
fairly sure he's just gunna cut the frames off the top and change them to 75 series 1's and use them on his 75 series
fairly sure he's just gunna cut the frames off the top and change them to 75 series 1's and use them on his 75 series
Resident Terrorist
Re: Any one converted the crank windows to pwr in the 7x ser
I recall someone on here doing it on a 75 and actually doing up a pretty comprehensive write up on it. Search could turn something up.
Re: Any one converted the crank windows to pwr in the 7x ser
i remember that to
Re: Any one converted the crank windows to pwr in the 7x ser
bolts straight in from memory.. you will need the control relay though and the door switches... when i got my set i missed the control relay... now ive just got half doors 
xxxx wrote:
Re: Any one converted the crank windows to pwr in the 7x ser
just removed mine all bolt in
Who is online
Users browsing this forum: No registered users and 0 guests