Page 1 of 1
Any one converted the crank windows to pwr in the 7x series
Posted: Sun May 15, 2011 3:53 pm
by GO79
looking to convert my manual windows to eletric in my 7x series
has any one does this before
what parts are needed
how do you go about wiring the system up
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Sun May 15, 2011 5:21 pm
by BFCK97
hans't been done yet but my brother got a set of bundera doors to get all the mechanisms out of, think he picked up the pair of doors for $50.
fairly sure he's just gunna cut the frames off the top and change them to 75 series 1's and use them on his 75 series
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Sun May 15, 2011 6:13 pm
by RAY185
I recall someone on here doing it on a 75 and actually doing up a pretty comprehensive write up on it. Search could turn something up.
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Sun May 15, 2011 6:17 pm
by 302 cruiser
i remember that to
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Tue May 24, 2011 9:44 pm
by Ice
bolts straight in from memory.. you will need the control relay though and the door switches... when i got my set i missed the control relay... now ive just got half doors
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Wed May 25, 2011 10:47 am
by MADSHORT
just removed mine all bolt in
Re: Any one converted the crank windows to pwr in the 7x ser
Posted: Wed May 25, 2011 11:00 pm
by Canyonero 4x4