I have stock 1997 6cl 4L Jeep Grand Cherokee and i want to upgrade it so that it's ready for real 4WDing.... Please give me some advice on what i should do, which parts i should get and where to get it all
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Upgrading my jeep
Moderator: GUtripper
Upgrading my jeep
Last edited by Bowdzz on Thu Jul 08, 2004 3:32 pm, edited 2 times in total.
bout time you started showing that car a real good time, its been begging for it 
Goes well off road but it needs a bit more clearance to get over that tuff stuff. Not much experience or knowledge when it comes to coils but being in the jeep forum you just might be in good hands.
Goes well off road but it needs a bit more clearance to get over that tuff stuff. Not much experience or knowledge when it comes to coils but being in the jeep forum you just might be in good hands.
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
this may help? dont know
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=21930
BTW post your piccys.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=21930
BTW post your piccys.
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
What size tyres do you wanna run?
How extreme to you want it?
etc.....There's quite few mods available for the ZJ - just not quite as many as the TJ
But just depends on your perspective of what "upgraded" is......we COULD get 44"s under there - but its gonna hurt
Next think of lift, lockers, ratios and driveline beef.
How extreme to you want it?
etc.....There's quite few mods available for the ZJ - just not quite as many as the TJ
But just depends on your perspective of what "upgraded" is......we COULD get 44"s under there - but its gonna hurt
Next think of lift, lockers, ratios and driveline beef.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Hey Bowdzz,
I am actually a TJ driver pretending i know about ZJ's. hehe. But there is a guy in SJC with a ZJ with about 3.5-4 inches of lift (Rubicon Express) and running 31 MT/R's. It does really well on some pretty tricky stuff. Rcenetly got dual lockers too so it goes most places. Unfortunatly i think ARB have stopped making the winch bar for the ZJ but not 100% on that.
I am actually a TJ driver pretending i know about ZJ's. hehe. But there is a guy in SJC with a ZJ with about 3.5-4 inches of lift (Rubicon Express) and running 31 MT/R's. It does really well on some pretty tricky stuff. Rcenetly got dual lockers too so it goes most places. Unfortunatly i think ARB have stopped making the winch bar for the ZJ but not 100% on that.
ZJ ZG alls the same
SirCamel probably has listed the ideal setup given what you've said now.
Get a small-moderate lift, 30-31" muddies, IMHO consider skipping the bullbar in favour $$ towards lockers.
Also consider skidplating esp for the sills etc....
SirCamel probably has listed the ideal setup given what you've said now.
Get a small-moderate lift, 30-31" muddies, IMHO consider skipping the bullbar in favour $$ towards lockers.
Also consider skidplating esp for the sills etc....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Having played with my ZJ, I can run 30X9.5 Coopers underneath the guards. Have fitted and run 31"X 10.5 but they do rub a little on full lock.
Needed?
40mm coil spacers coupled with 40mm shocker re-locater mounts. NO disconects as this would mean the tyres would rip out the front guard inserts on full articulation.
No re-gear but it struggled on 31's. Took me most places, but I have defered my ZJ ambitions for a CJ10 that I can knock about a bit.
The ZJ is a capable beast - just depends how far U want to go with it.
Needed?
40mm coil spacers coupled with 40mm shocker re-locater mounts. NO disconects as this would mean the tyres would rip out the front guard inserts on full articulation.
No re-gear but it struggled on 31's. Took me most places, but I have defered my ZJ ambitions for a CJ10 that I can knock about a bit.
The ZJ is a capable beast - just depends how far U want to go with it.
Non-funded retiree.
Coopers 
Who is online
Users browsing this forum: No registered users and 14 guests