I have just put the brake system back together and cant get any fluid through the LPV, i can bleed it no worries but cant get any through to the back brakes. it has been modified for coil conversion so the bar has been cut and now just has an adjuster on it, which i have adjust from one limit to the other and made no difference. i have mounted it upside down, would this stop it from working properly, or is there another problem maybe,
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Load proportioning valve problems
Moderators: toaddog, Elmo, DUDELUX
Re: Load proportioning valve problems
Sounds like the valve is stuffed but I'm not expert on em. You could run a manual brake bias adjuster like this http://www.ebay.com.au/itm/WILWOOD-Brak ... 2562a04b56" onclick="window.open(this.href);return false; and dial in ya bias spot on. They're legal if they're not mounted inside the cab and if they can't be adjusted without tools.
Who is online
Users browsing this forum: No registered users and 3 guests