Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best Sierra Modifications !

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 4
Joined: Mon Jul 05, 2004 2:53 pm
Location: Australia

Best Sierra Modifications !

Post by ZookCam »

As a new Zook owner i would like to hear peoples opinions on what they consider to be their best modifications and why?

pls include;

modification/$cost/$labour (or difficulty to self install)

and an idea of the cars improvement.




Cheers/Beers :drinking:
'92 Sierra
Bullbar/Rollbar
Extractors
2" Exhaust
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Post by Liam »

Welding a bottle openner to the rollcage.
www.bbmotorsports.com.au
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Best Mod
6:1 Rockhoppers $1300

Cheapest Mod
Welded rear diff about $fitty

Bottle opener on the rool cage would be sweet
yeshemesh
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Which State are you in. It may be worth joining your local Suzuki club.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

Chuck the sway bar.
Cost= nothing

difficulty:nil
time:10 minnys
Advantages: The front suspension will move much more freely when off road.
disadvantages: slightly more body roll when cornering and the steering isnt as tight. although you wont notice it after a few days driving.
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

#1. open up the clamps on ya springs and weld a bolt on top to allow leaves to seperate a little bit. wont effect handling but will give ya about 2inches more down travel when off road. 2>4 hours depending on arc welding ability and or use of gas torch / oxy welder to heat clamps b4 bending

#2. extended shackles and lowered bumpstops. Lets you get more height to fit the bigger rubber and the stops stop ya from chewing them up in ya guards.

#3. Lip the guards. use a rubber mallet and bend flat all the sharp edges in ya wheel arch. will stop you from destroying ya newly paid for mud tyres.

#4. remove all the carpet and install a loud stereo. Nothing smells worse than wet mouldy carpet. the stereo stops ya hearing all those dad noises carpet usually blocks out.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 100
Joined: Wed Jun 02, 2004 7:21 pm

Post by Toj0 »

Mud tyres & rear locker (Any type that's affordable)

I went the air locker (Daily Driver) $1100 fitted but there are plenty of people around who can fit them. Weld the rear if you're really short for cash and it's not a daily driver.

Mud tyres - depends on the brand size etc - Doesn't matter it will still make a huge difference to off road ability (I won't go into tyres - everyone has an opinion which has been covered many times before)

Get rid of the sway bar.
Tojo
96 coily with bits to replace the bits I knocked off
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

If your in WA im selling a calmini 5" sr lift kit come complete with everything and 5 31x10.5 wrangler mt/r's $2400 obo. All u need to get started all 1 year old tyres are 80% good condition.
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

vitarajim wtf u puttin patrol diffs in a suzi u planin to run 44" boggers or somthing
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

I had a Vitara, got sick or busting CV's and diff housings. Just thought that i would build something stronger.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 18
Joined: Tue Nov 02, 2004 9:25 pm
Location: QLD

Post by WiKiD*ZoOk »

Ive just baught my first 4wd a 1986 model holden drover and ive just disonected the front swaybar and it no flexes a fare bit more but the stocko shackels look like they are bending!!!! :x :x :x im not entirly shore but does this sound like sumthing that would happen????? Any help Apreciated.
Droving the Land
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

WiKiD*ZoOk wrote:Ive just baught my first 4wd a 1986 model holden drover and ive just disonected the front swaybar and it no flexes a fare bit more but the stocko shackels look like they are bending!!!! :x :x :x im not entirly shore but does this sound like sumthing that would happen????? Any help Apreciated.


The shackles will move around a bit, prolly best you get a pic, chances are your bushes are toasted too.
yeshemesh
Posts: 122
Joined: Thu Jun 03, 2004 7:53 pm
Location: Canberra

Post by RIKSTR »

Swaybar first $0
2" Body lift about $50 or $60 to fit bigger tyres later
followed closely by the bottle opener
V6 GV , Body Lift , Calmini , 255/70 BF MTR
Post Reply

Who is online

Users browsing this forum: No registered users and 67 guests