Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU hubs onto a GQ ?
GU hubs onto a GQ ?
I have a GQ wagon with AVM locking hubs the high performance ones they are not the standard AVM ones as I blew one of those to bits and was told by UV 4x4 who fitted them they are stronger than the Nissan ones ? But now hear stories they are weaker? So will the locking hubs from my GU work ute fit onto the GQ ? And are the GU hubs stronger than Gq ?
92 gq lwb 4.2 efi cheezy winch bar ,10000 tjm winch ,custom rear tube bar , rock sliders, 35 bfg muds = plenty of battle scars !
Re: GU hubs onto a GQ ?
GU Cv's are bigger, although axles are the same, so they may or may not fit.
I have mine apart at the moment if you want me to put the verniers onto them or spline # etc.
I have mine apart at the moment if you want me to put the verniers onto them or spline # etc.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Re: GU hubs onto a GQ ?
Gq/Gu locking hubs are interchangeable.
Supposedly so are mq but i havent tested this one.
Supposedly so are mq but i havent tested this one.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
76 Landcruiser tow rig
Re: GU hubs onto a GQ ?
they should go on, i changed the manual hubs from my gq diff with the auto hubs on my new gu diff. Straight changeover.
Who is online
Users browsing this forum: No registered users and 2 guests