Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

torque settings for fly wheel

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

torque settings for fly wheel

Post by duncan »

As it says can anyone let me know the torque settings for the fly wheel bolts on a 97 vitara with the 16b motor thanks
Top
Posts: 348
Joined: Sun Aug 23, 2009 9:55 am
Location: Brisbane

Re: torque settings for fly wheel

Post by VooDoo »

Most are around 75ftlb. Use some locktight too.
Top
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: torque settings for fly wheel

Post by V.W.Dave »

Are you talking about the bolts that hold the flywheel to the crank or the press plate to the flywheel?
70fp for the crank
The press plate is only like 25fp or less
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Re: torque settings for fly wheel

Post by duncan »

Thanks guys it was for the fly wheel to crank.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests