Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hz turbo

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 41
Joined: Sat May 30, 2009 3:54 pm
Location: QLD

1hz turbo

Post by 02HiLuX »

Have found a used turbo kit for my 1hz 100 series. It comes with turbo, manifold, dump pipe but none of the plumbing. What is the best material to use and how much extra cost am i up for to set it up? Cheers
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 1hz turbo

Post by 80's_delirious »

be careful about turboing the 105series 1HZ, if its not done right, they tend to not like it

(I'm not anti turbo by the way, just hear lots about them dying after turboing)
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Posts: 459
Joined: Mon Mar 07, 2011 9:23 am

Re: 1hz turbo

Post by old lux »

Oil hoses Copland hoses and all fittings to suit should cost you about $$150. Does it come with any of the turbo piping?

Just don't try to run massive boost and massive fuel. Done expect it to be a rocket ship. Pump 13 or 14 PSI threw it and it'll last a while.
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Top
Posts: 41
Joined: Sat May 30, 2009 3:54 pm
Location: QLD

Re: 1hz turbo

Post by 02HiLuX »

No worries, yer im not aiming for big power just want that bit extra. It doesnt come with any of the piping.
Top
Posts: 459
Joined: Mon Mar 07, 2011 9:23 am

Re: 1hz turbo

Post by old lux »

Till pretty easy tho. You use your standard cross over pipe. And just buy a few 90* bends and your done kinda
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Top
Posts: 41
Joined: Sat May 30, 2009 3:54 pm
Location: QLD

Re: 1hz turbo

Post by 02HiLuX »

What are the bends made of?
Top
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: 1hz turbo

Post by SCANAS »

A had an exhaust shop mandrel bend some pipe up for me for one turbo kit I had it was 2'1/2 inch mild steel exhaust pipe.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 1hz turbo

Post by 80's_delirious »

You can also get aluminium pipes and silicone bends cheap on eBay, search for turbo piping, find something suitable, cut the aluminium tube to get close, connect up with silicone bends or straight joiner and hose clamps
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests