Pleaqse delete this message because the problem has been solved
Thank You :gilge k98
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Delete this Add
Delete this Add
Last edited by gilge85k98 on Wed Jan 18, 2012 9:21 am, edited 1 time in total.
Re: Electrical 4,2 diesel to 3ltr Harnes difference
there is no pin in the dash harness in the 3lt there is only 1 ecu feed you need to put the second pin in and conect it to the earth tacho feed on the glow plug timer contact you local nissan dealer and get a dash pin out for your model . U may need to put a td42 dash in it as im not sure if your dash is calibrated for the td42 feed voltage. When we did my brothers gu 2.8 to td42 thats how we did it but it will depend on how much of the td42 engine harness you are using
Sunshine coast based onsite motorcycle repairs
Fully insured
Call james at ozy offroad
0421166146
Fully insured
Call james at ozy offroad
0421166146
Re: Electrical 4,2 diesel to 3ltr Harnes difference
I ran some new wires in from the pickup and simply tapped into the correct pins in the dash plug. I had to fit a missing pin to one of them as it wasn't used on the 2.8.
I found a free pin from a sway bar disconnect light or something that wasn't been used and refitted that to the correct spot. sweet as.
I found a free pin from a sway bar disconnect light or something that wasn't been used and refitted that to the correct spot. sweet as.
Living the dream on the hill that floods
Who is online
Users browsing this forum: No registered users and 57 guests