Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12mm Plunger for 1hz IP
Moderators: toaddog, Elmo, DUDELUX
12mm Plunger for 1hz IP
Chasing if any one has done this to their 1hz injector Pump. I believe the factory turboed engine has the 12mm plunger but was chasing to see if it will fit into a 1hz pump.
Re: 12mm Plunger for 1hz IP
try contacting Swaftec industries?? not sure of the name, they are in your area I thinkand from what I have read on here, I believe they would be able to point you in the right direction
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 12mm Plunger for 1hz IP
Swaftec is on Outers as "Swaffie", check in Nissan forum as he mostly does the TD42's - The same type pump used in the 1HZ.
The factory turbo does have the 12mm std however the timing ramp is completely different.
The factory turbo does have the 12mm std however the timing ramp is completely different.
LX470 1HDFTE
Performance Direct Bolt On Turbos for: 1HDT/1HDFT/1HDFTE/12HT/13BT/1VDFTV/1KDFTV
Performance Direct Bolt On Turbos for: 1HDT/1HDFT/1HDFTE/12HT/13BT/1VDFTV/1KDFTV
Re: 12mm Plunger for 1hz IP
He has run under the buisness name of diesel central for over 12 months now but hes ur man when it comes to pumps n injectors
Who is online
Users browsing this forum: No registered users and 0 guests