Page 1 of 1
12mm Plunger for 1hz IP
Posted: Tue Nov 29, 2011 8:18 pm
by horndog
Chasing if any one has done this to their 1hz injector Pump. I believe the factory turboed engine has the 12mm plunger but was chasing to see if it will fit into a 1hz pump.
Re: 12mm Plunger for 1hz IP
Posted: Tue Nov 29, 2011 8:41 pm
by 80's_delirious
try contacting Swaftec industries?? not sure of the name, they are in your area I thinkand from what I have read on here, I believe they would be able to point you in the right direction
Re: 12mm Plunger for 1hz IP
Posted: Tue Nov 29, 2011 8:43 pm
by ledgend80
x2...
Re: 12mm Plunger for 1hz IP
Posted: Wed Nov 30, 2011 10:34 am
by CustomTurbos
Swaftec is on Outers as "Swaffie", check in Nissan forum as he mostly does the TD42's - The same type pump used in the 1HZ.
The factory turbo does have the 12mm std however the timing ramp is completely different.
Re: 12mm Plunger for 1hz IP
Posted: Sun Dec 04, 2011 6:57 pm
by matts_gemmy
He has run under the buisness name of diesel central for over 12 months now but hes ur man when it comes to pumps n injectors