im thinking of doing a spring over conversion how much lift will i gain?
what other mods will i have to do as in tail shafts, high steer ect
cheers brad
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series spring over
Moderators: toaddog, Elmo, DUDELUX
Re: 60 series spring over
im thinking of doing a spring over conversion how much lift will i gain?
what other mods will i have to do as in tail shafts, high steer ect
Yep high steer, cut & rotate front knuckles to improve front pinion angle, obviously remove and replace spring mounts, WILL need a track bar for rear diff, extended brake lines, maybe tail shaft spacers, maybe reduce the spring packs, maybe shock mounts depending on what you want to do with the vehicle
If your handy enough everything can be done in a reasonable workshop. Check out the bible thread it has a good guide, i followed this and drove mine aa a daily driver for years and was pleased with it
what other mods will i have to do as in tail shafts, high steer ect
Yep high steer, cut & rotate front knuckles to improve front pinion angle, obviously remove and replace spring mounts, WILL need a track bar for rear diff, extended brake lines, maybe tail shaft spacers, maybe reduce the spring packs, maybe shock mounts depending on what you want to do with the vehicle
If your handy enough everything can be done in a reasonable workshop. Check out the bible thread it has a good guide, i followed this and drove mine aa a daily driver for years and was pleased with it
LN106 1uzfe - 33's - crawlers - locker
HJ61 Sprung over -20psi - 35's - dual locked
HJ61 Sprung over -20psi - 35's - dual locked
Who is online
Users browsing this forum: No registered users and 0 guests