I'm chasing the length of a dual gear driven hilux transfer case setup preferably behind a th700 auto from the auto output to the rear output shaft flange.
Just trying to figure out a few measurements for an upcoming project and decide if the extra gearing options of the twin cases are worth the extra length.
Thanks guys.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dual case length
Moderators: toaddog, Elmo, DUDELUX
Re: Dual case length
From memory the adapter and reduction housing adds 7 inches to the length of the driveline.
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: Dual case length
yep its 170mm extra including adaptor
'91 Toyota Surf SSR Ltd. 2.4 TD Auto, Coil SAS, Duals, 4.88, Longs w/ front ARB, 35" MTRs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
Who is online
Users browsing this forum: No registered users and 9 guests