Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pyro temps

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 10
Joined: Thu Dec 17, 2009 8:47 pm
Location: mc crae

Pyro temps

Post by ashgq89 »

I just bought a td42 and my pyro gauge reads up at 550 while traveling up a hill on the road and my mate has the same car and his was reading 380 degrees so what can it be
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Re: Pyro temps

Post by gu town »

do you have them installed in exactly the same spot, are they the same quality guages and temp senders, were you in the same gear, are your airfilters the same age/condition? these are just a few of many, many variables.

what are your concerns? 550deg is generally the accepted upper limit if the sender is placed post turbo.

post more info if you want a better answer.
GU td42 ute with go fast bits and go futher bits
Posts: 10
Joined: Thu Dec 17, 2009 8:47 pm
Location: mc crae

Re: Pyro temps

Post by ashgq89 »

Hey mate yeah they are the same brand vdo gauges and we where both doing 100ks in 4th gear, i just want to no why his runs a lot cooler than mine? They both have 160g kilmeters on the clock. What is the safe range it should sit at? When is it runnnning to hot?
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

Your mate is either running less fuel then you are or his pyro sender is further to the turbo than yours.
550c for short periods of time won't be an issue.

General rule of thumb is to back off the throttle when it gets to 550c.
GU Patrol with go better bits added
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: Pyro temps

Post by GUtripper »

Skegbudley wrote:Your mate is either running less fuel then you are or his pyro sender is further to the turbo than yours.
550c for short periods of time won't be an issue.

General rule of thumb is to back off the throttle when it gets to 550c.
They can vary a lot from car to car.... A stock GU 4.2 can easily hit 650 deg in factory tune.

Your mate may have better breathing, a more efficient intercooler, or less fuel being injected. 550 up a hill is not an issue, over 550 for prolonged periods can apparently do damage..... But plenty of cars run at this level for years with no issues at all.
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Re: Pyro temps

Post by tye1986 »

Wat turbos an Wat size exhaust are use both running
gq coil cab with stuff
Posts: 11
Joined: Thu Nov 10, 2011 8:10 pm

Re: Pyro temps

Post by navaraD40 »

Has anyone ever found a decent website that lists common cars pyro and water temps?
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: Pyro temps

Post by Wozza244 »

navaraD40 wrote:Has anyone ever found a decent website that lists common cars pyro and water temps?
Start a thread here in General Tech and people could post what vehicle, motor, aspiration etc and the figures they are getting. Maybe it could end up as a sticky. It would be a good comparison.
Get out there!!
Posts: 31
Joined: Sun Aug 06, 2006 10:10 pm
Location: boronia vic

Re: Pyro temps

Post by bruggd »

Gq 1995, TD42, originally non turbo, 500,000ks. Water cooled BB Garret turbo, 3inch strait through exhaust with pyro probe post turbo. Large FMI, fuel pump turned up 1/2 turn. Exhaust temp never goes over 500deg, And I do push it hard at times.
A mate has a ZD30 GU, all the anti grenade mods are done except exhaust, his exhaust temp gets to 650 easily on the same hills when I'm following. 3inch coming soon to see if that helps.
Posts: 459
Joined: Mon Mar 07, 2011 9:23 am

Re: Pyro temps

Post by old lux »

A work mTe has a new naval the v6 turbo diesels. He I's running 285s and sits on 180kph for 2 and 3 hours at a time with pyro at 850-900 no issues yet. That's post turbo "diesel mechanic by trade so he knows how to set things up"
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Posts: 247
Joined: Wed Apr 19, 2006 9:13 pm
Location: Perth

Re: Pyro temps

Post by 84mksd33t »

850-950 fahrenheit perhaps....
Posts: 459
Joined: Mon Mar 07, 2011 9:23 am

Re: Pyro temps

Post by old lux »

No Celsius. Has the auto box and sits on 3200RPM and with a tray fully loaded with tool boxes and tool
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Re: Pyro temps

Post by chunks »

Hopefully it blows up on him soon, I don't want my family driving around on the roads with farkwits doing 180 kmh in a fully loaded fourby, or any other car for that matter....
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

Wozza244 wrote:
navaraD40 wrote:Has anyone ever found a decent website that lists common cars pyro and water temps?
Start a thread here in General Tech and people could post what vehicle, motor, aspiration etc and the figures they are getting. Maybe it could end up as a sticky. It would be a good comparison.

We did that on Patrol4x4.com with some interesting results.
http://www.patrol4x4.com/forum/nissan-p ... vey-52005/" onclick="window.open(this.href);return false;

Those of us with decent intercoolers generally had much lower EGT temps.

Can anybody beat this?
Post up your results.
Image
GU Patrol with go better bits added
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

old lux wrote:A work mTe has a new naval the v6 turbo diesels. He I's running 285s and sits on 180kph for 2 and 3 hours at a time with pyro at 850-900 no issues yet. That's post turbo "diesel mechanic by trade so he knows how to set things up"

Sounds like Rolly before his Patrol found its way onto Awill's list.
GU Patrol with go better bits added
Posts: 57
Joined: Wed Jun 28, 2006 3:34 pm

Re: Pyro temps

Post by marty »

Pump timing will also have a large affect on egt's.
Skegbudley that photo is worthless, what are you trying to show?
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

marty wrote:Pump timing will also have a large affect on egt's.
Skegbudley that photo is worthless, what are you trying to show?
What is worthless about the photo?

260c @ 110kph on a flat road. Can't you read gauges?
That is a hell of a lot less than stock. (Even with my boost turned down)
GU Patrol with go better bits added
Posts: 57
Joined: Wed Jun 28, 2006 3:34 pm

Re: Pyro temps

Post by marty »

I can read.
What I can't see is were your foot is or what was happening before your took the photo.
I can get the same or better depends on were my foot is.
Point being it is not a good example.
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

The pic was taken on a dead straight, level section of road at cruise speed.
The pic tells you several things. You can see from it that I was cruising at 110kph on a flat road. That I was not coasting and therefore showing an lower EGT than normal. It shows my boost level. It shows my EGT.
We have a collection of these pics from different members for comparison.
It all makes sense when you compare them together.


The Only thing I left out (My bad)is what engine I am running and the mods I have done to achieve these results.
2003 ZD30 Di.
Cross Country intercooler.
Full nads install. (Dawes valve, needle valve, EGR block, catch can)
GU Patrol with go better bits added
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

The pic was taken on a dead straight, level section of road at cruise speed.
The pic tells you several things. You can see from it that I was cruising at 110kph on a flat road. That I was not coasting and therefore showing an lower EGT than normal. It shows my boost level. It shows my EGT.
We have a collection of these pics from different members for comparison.
It all makes sense when you compare them together.


The Only thing I left out (My bad)is what engine I am running and the mods I have done to achieve these results.
2003 ZD30 Di.
Cross Country intercooler.
Full nads install. (Dawes valve, needle valve, EGR block, catch can)
GU Patrol with go better bits added
Posts: 31
Joined: Sun Aug 06, 2006 10:10 pm
Location: boronia vic

Re: Pyro temps

Post by bruggd »

Skegbudley wrote:The pic was taken on a dead straight, level section of road at cruise speed.
The pic tells you several things. You can see from it that I was cruising at 110kph on a flat road. That I was not coasting and therefore showing an lower EGT than normal. It shows my boost level. It shows my EGT.
We have a collection of these pics from different members for comparison.
It all makes sense when you compare them together.


The Only thing I left out (My bad)is what engine I am running and the mods I have done to achieve these results.
2003 ZD30 Di.
Cross Country intercooler.
Full nads install. (Dawes valve, needle valve, EGR block, catch can)

I have done most those mods on my mates ZD30 but he has stock I/C with a fan, I haven't seen his temps look anywhere near that low at 110ks, they are much better than stock though.
Mate have you got standard exhaust?
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Pyro temps

Post by Skegbudley »

bruggd wrote:
Skegbudley wrote:The pic was taken on a dead straight, level section of road at cruise speed.
The pic tells you several things. You can see from it that I was cruising at 110kph on a flat road. That I was not coasting and therefore showing an lower EGT than normal. It shows my boost level. It shows my EGT.
We have a collection of these pics from different members for comparison.
It all makes sense when you compare them together.


The Only thing I left out (My bad)is what engine I am running and the mods I have done to achieve these results.
2003 ZD30 Di.
Cross Country intercooler.
Full nads install. (Dawes valve, needle valve, EGR block, catch can)

I have done most those mods on my mates ZD30 but he has stock I/C with a fan, I haven't seen his temps look anywhere near that low at 110ks, they are much better than stock though.
Mate have you got standard exhaust?
Yeah mate. Exhaust is standard ATM. I wanted to get the intake side of things correct before chipping it and fitting a larger exhaust.
GU Patrol with go better bits added
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests