Page 1 of 1
high mount bullbar
Posted: Fri Jan 13, 2012 6:58 am
by howsie
Guys just wanna know if a.low mount winch will fit.in a bar designed for a.high mount it has holes for both and is a arb bar
Re: high mount bullbar
Posted: Fri Jan 13, 2012 10:57 am
by gudge
Yeah it will fit.
Re: high mount bullbar
Posted: Sun Jan 15, 2012 7:29 pm
by Wozza244
It will fit, with mods. Fitting a Tigerz 12,000 lowmount my Hi Mount bar required longer bolts than supplied, for the bottom holes through the Hawse Fairlead to pass through the spacers i had to put between the winch and the bar.. I had to space the winch off the inside of the bar about 10mm. I used some large nuts as spacers, as i didnt have any washers laying around at the time. I do remember it being a fiddly job too, definitely do it with a mate, by myself was very awkward.