Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

replacing rear coils & shocks jackaroo

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 7
Joined: Thu Jun 10, 2010 4:32 pm
Location: adelaide hills

replacing rear coils & shocks jackaroo

Post by madabout80s »

Hey all,

just bought the hand brake a late 92 swb jackaroo and noticed the rear coil was in two peices so i have ordered new EFS coils and shocks just wondering how to get the shocks off do i undo the mounting nuts before i put it up on the hoist or just do it when its up on the hoist. What is the easiest? also any tricks that will make the job easier
who said i couldnt make it up that hill
landbruzer 99 105s 4.5lt
landbruzer 93 80s 4.5lt
jackeroo swb 92 3.2lt v6
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Re: replacing rear coils & shocks jackaroo

Post by Yarno »

Pull the shocks off at the bottom before lifting on the hoist/jack the just lift body remove old springs, insert new springs (even 2in lifted ones go in easily like this) then as you are lowering it make sure the springs are located correctly...
Go hard or go home!!!
MU build here
Posts: 62
Joined: Fri Sep 22, 2006 10:09 am

Re: replacing rear coils & shocks jackaroo

Post by Havabigjuan »

I reversed my old LWB Jack onto ramps to do the shocks, they are a piece of piss :armsup:

to do coils I jacked up the whole lot and lowered the body on to jack stands letting the diff drop...I reckon I had to undo shocks and sway bar
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests