I was wondering if anyone would be able to enlighten me with the impact of the angle of a CV's, verses the speed in which it is rotating. I have found info in regards to operating angles of UJ's and speed in which they can operate at, however i can't seem to find anything about CV's. I understand that there are different types of CV's available and which ones work better at large angles, but none seem to have a relation to the speed in which the joint can operate at, before reliability and integrity of the CV become a concern.
any advice would be appreciated, and whom would be the number one business to talk to in regards to manufacturing a CV joint that can operate at high angles at speed.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cv's ,angle verses speed
Moderators: toaddog, TWISTY, V8Patrol, Moderators
cv's ,angle verses speed
MUD, MUD, GLORIOUS MUD!
Re: cv's ,angle verses speed
http://www.cornay.com/" onclick="window.open(this.href);return false;
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 88 guests