Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LED Brake Tail Lights Backfeeding

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

LED Brake Tail Lights Backfeeding

Post by Red04VXE »

Recently fitted Electric Brakes to my old mans camper trailer. Had dramas on the first outing with the brakes staying on causing dramas. Upon investigating the cause it seems the cheap shit lights that Powerful 4x4 fit to their rear bars are the culprit. If you put 12v into the tail light wire 4-6 Volts come out of the brake light wire causing the brake controller to activate when the Headlights are on. Also works the other way, 12v to brakes = 12v out taillight wire. All this is on a 200Series GXL using the trailer wiring to run the lights in the rear bar and trailer. Fixed now by removing them and replacing with Narva Combination LED Lamps due to original indicators being broken already due to poor design.

Anyone else come across this problem at all?
S.E.Qld Locals Crew.....
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: LED Brake Tail Lights Backfeeding

Post by 80's_delirious »

Have a look through lcool forums, there has been discussion about LED tail/brake lights causing electrical gremlins. Not sure if details.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 15
Joined: Sat Aug 18, 2012 7:16 pm

Re: LED Brake Tail Lights Backfeeding

Post by DaGMan »

A simple diode will fix this, allows the 12v DC to travel only one way and blocks the other way. It will need to be installed "in line" by cutting the wire to the light and soldering or crimping it in.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests