reduction gears for Gen 2
Posted: Tue Jun 19, 2012 6:14 pm
Guys, in case anyone is after 3.15 reduction gers for their Gen2.
Hardmanns have re specced the design meaning a lowering of the reduction ratio from 3.15 to 2.70 due to the small modding required for the 3.15 to fit.
They will however do a special re run of 3.15 if they can get a minumum order of 20 sets.
see here for more info
http://www.4x4wire.com/forums/showflat. ... rt=14&vc=1" onclick="window.open(this.href);return false;
Hardmanns have re specced the design meaning a lowering of the reduction ratio from 3.15 to 2.70 due to the small modding required for the 3.15 to fit.
They will however do a special re run of 3.15 if they can get a minumum order of 20 sets.
see here for more info
http://www.4x4wire.com/forums/showflat. ... rt=14&vc=1" onclick="window.open(this.href);return false;