Outer Limits 4x4 Board

We have worked out how to fit an air locker to the front of a coily Sierra if anyone is interested.
SAM

Was this after speaking to the contact i gave you Sam?

Yes Ruff he told me wich locker to use but wouldn't tell me what to modifie to make them fit, so I worked that bit out for myself.

Cool 8)

We have a guy in our club that is getting one and ARB are remachining one to fit. What did you do to make it fit?

i was thinking to get an EZ locka for the front of my coiler just to save money, its just like a lockright so it sits inside of the front hemi. They make them and market them for the jimny however i heard that the jimny diffs is very simular to the coilers front. its got something to do with the number of pins the diff has.

whats is the number in pins (2 or 4) for the coiler's front and the jimnys front. if its the same then it should fit without any machining or mods done to the diff or locka.

Welding the planetry gears is not an option. ARB cost tooooooo much.

Grimbo we also had to remachine the casing. :wink: :wink:

That would be bloody right :mad: i get a new truck and then some1 close works out how to fit em!!!. I got the same feed back wen i rang him too ,he didnt want to spill the beans which is fair-enough i guess.

oh well A1 has still gotta go. with all accessarys if any 1 is interested!!!A1


Sam i will get in contact with ya soon bout wat hypo was talkin to ya bout

Cheers Dan

A1 you could always sell the pooootroll
The mods to fit the locker aren't to hard but you do need a mill and a lathe and know how to use them.
It took me 6 hours to get it right so I don't mean to be arrogant by not spilling the beans on exactly how its done.
But if people want to supply the locker and diff I am more than happy to do the mods.


A1 we will havwe to talk about what Hypo said.
Cheers
SAM

overkill wrote:
A1 we will havwe to talk about what Hypo said.
Cheers
SAM

secret mens business hey?

No prob Sam wen i get a chance durin daylight hours ill give ya a ring ,

And it aint a poootroolll its a poooMAV

And the way things r goin with A1 it may well end up gettin a front locker ,no-one seems to want it (DAMN it NO funds for moddin da MAV),buy it i mean !!.

And i park it in me shed on thursdy n come back out to c a nice puddle of oil under it ,looks as though im goin to b changin a rear main oil seal.

Just wat you want to be doin wen its up 4 sale.


And Cam yes secret business vey technical(you wouldnt understand)

A1 its not leaking it's crying because he can't believr you getting rid of him for a POOOOOOOMAV. Comeon have a heart.

Well Sam u give me a good enough deal and i might be able to get front five link rear 4 tri link and a lokka 4 A1 .



Sam if it were only a few months earlier!!!!!!!!!!!!!Ill would've been drivin a dual locked coily yeeehaaaa , oh well i can still out drive luxes with 1 heheheheheh(hypo)








Anyway back to da topic

Now your making me feel sorry for your Zook I might just have to help you so you stay in a ZOOK.
A ZOOK will always outdrive toyota's Hypo and Dave.

A1, keep the Zook don't defect!!

Sorry Nam Mav is already in the shed bodylift dunn now time for panel mods then s lift tyres gears n lokkas .

But if A1 eva goes there will certainly be regret 4 a bit im sure,it has been a great truck and has gone everywhere its been pointed (almost), just gotta fix rear main seal now (b_astard). But if Sam is right its only havin a cry but i wish it would hurry up n stop b4 i have to start refillin it with oil .

this sounds awesome.

How much would it cost to fit a locker or airlocker in the front of a coily?

id bee keen to try

andrew

Holy Gravedig Batman!

Contact Sam at Overkill - I believe he's done a few.

A also believe it's possible to fit a jimny 3rd member (whole cast diff centre bit) into a coiler and use an off the shelf airlocker. This will also gain you 4.1 diffs (slightly lower) but you'll have to replace the rear diff too if you were to try this.

Steve.

diameter of the jimny third member casting is 1 litre size, the casting on the coily is 1.3 litre diameter.

Oh well, there you go then....

More coily wierdness.

Steve.

bring back the old days when suzuki kept stuff the same ( sort of!).
could mod a whole jimny diff housing to wack in the coily, then make up some real coil and shock mounts.

so i take it the airlockers are being re-drilled and machined from the current 10 bolt pattern to the coily 8 bolt?