can anyone offer lengths for 80 series long side front inner axle shaft and long side rear axles shaft (full float)
also
are they the same 30 spline both ends
and can anyone offer spline lengths for them, pictures with a tape/ruler along spline would be great so i can guage what i may/may not be able to do
chasing something around 853-860mm maybe more for full float custom job on my hilux
been searching net but havent got the complete picture, just parts of info i need
Craig
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
axle shaft lengths
Moderators: toaddog, Elmo, DUDELUX
Re: axle shaft lengths
I think they are all the same spline count until they change to 5 stud.
Cant say if the spline is the same either end. Will try to remember to have a look at some of the old cruiser axles we have at work, pretty sure we have a couple with CVs off, if not I'll have a crack at getting them off. Might not be able to positively ID them though, depending if anyone has labelled them when they were taken out.
Cant say if the spline is the same either end. Will try to remember to have a look at some of the old cruiser axles we have at work, pretty sure we have a couple with CVs off, if not I'll have a crack at getting them off. Might not be able to positively ID them though, depending if anyone has labelled them when they were taken out.
The old Luxy was fun, but with a young family comes great responsibility.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
Re: axle shaft lengths
thanks for that
Who is online
Users browsing this forum: No registered users and 10 guests