Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 rear brakes Drum too Disc

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

80 rear brakes Drum too Disc

Post by V.W.Dave »

Hey can some one tell me if I have a complete rear diff of a early 80 that has drum brakes can I go to a wrecker and strip all the brakes off a disc rear end and transplant it over? basicly I am asking are the housings exactly the same? Or can it be done with a few simple mods?
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 rear brakes Drum too Disc

Post by 80's_delirious »

I may be wrong, but i think drum brake 80series have semi floating axles, disc braked 80series have full floating axle/hubs.


Wouldn't it be easier, less work to swap a complete rear diff over?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: 80 rear brakes Drum too Disc

Post by V.W.Dave »

Not when the 80 diff I have has been completely shaved and modified to be put under a Rover.

We have good conections with a few wreckers up here and I can get all the bits cheap but I want to make sure they will work.
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 rear brakes Drum too Disc

Post by 80's_delirious »

A quick look on Toyodiy at parts reference for a 1990 std 80series (had either drums or discs), toyodiy make no distinction in part numbers between drum braked or disc braked rear diff housing. So it looks like the housings are probably all the same?


http://www.toyodiy.com/parts/g_G_1990_T ... CMRSQ.html
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 294
Joined: Tue Feb 03, 2004 8:59 pm
Location: sydney

Re: 80 rear brakes Drum too Disc

Post by MUD80D »

housings are different between the two backing plates bolt on different between the two
toyota 80#,d/cab ute chop,6" springs,20mm body lift, 315/75/16 muds, and 39" michelin XML play tyres , turbo 4.2 1HZ top mount intercooler diesel.now ENGINEERED.
Reece
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests