I've hit a bit of a wall at diagnosing a centre bearing problem
With my D22 navara 3.2 DX
I Think it has the wrong tailshaft in the rear because it seems about 20mm too short
Could anybody measure the sections of their rear tailshaft for me please so I
Can confirm this?
My rear section was 908mm from mounting face to mounting face
Front section was 408mm from inside of cup in transmission to mounting face
Would be super appreciative if anyone could spare me the time to check!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Anyone have a D22 s/cab?
Who is online
Users browsing this forum: No registered users and 0 guests