heres is my build.
its a 1980 f100 4x4 with a 250 cross flow boat anchor.
the plan:
put a diesel in it
rebiuld the hole thing
2'' suspension lift
coil rear end
lockers f&r
tricky tray
f&r winches
200 litre tank
100 litre water tank with tap outlet
and some other bits and pieces
are there any others on here that i can pull some inspiration from? as the yank ones arent my cup of tea.
than the pull down begins
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1980 f100
Moderator: Tiny
Re: 1980 f100
hey mate im currently looking into finding an f truck for truggy project. what front diff does yours have?
Re: 1980 f100
From what I can see looks like a Dana 44
My friends aren't holding me back..... I'm pulling 'em forward.
Re: 1980 f100
yeah mate dana 44, the yanks dont like them, but thats because they give it a 100'' lift and stick 200'' tyres on it, lol. the diff will put up with a ridiculous amount of abuse, the lsd in the rear is second to none. the drive line of the 70's to 80,s f trucks are built like a medium ridgid truck, drive shafts are huge, cvs are huge.
things to look out for on the aussie ones.
people always talk about f100s and cracking chassis, with out knowing the facts and makes fools of themselves. yes they do crack, only the aussie ones, the reason was a very poor rhd conversion and a worse power steer and steering box mount. the rest is dynamite.
stock final drive is 3.5 and the they only weigh a ton, with the lwb model like mine, the wb is 117'', so a bit long but once you see the wheel track of 1654mm for the front and 1636 for the rear respectively, it is one stable truck, the front suspension setup is made for offroad, and the rear is o.k, if you are going to keep the ass leaf, you will need a track bar.
they are hell expensive imo, and parts are a bit thin on the ground, for a truggy it may be a bit big, my suggestion would be to wreck and cut up a hilux, plenty of cheapos and plenty of parts. or make the effy into a cool registered social wheeler.
things to look out for on the aussie ones.
people always talk about f100s and cracking chassis, with out knowing the facts and makes fools of themselves. yes they do crack, only the aussie ones, the reason was a very poor rhd conversion and a worse power steer and steering box mount. the rest is dynamite.
stock final drive is 3.5 and the they only weigh a ton, with the lwb model like mine, the wb is 117'', so a bit long but once you see the wheel track of 1654mm for the front and 1636 for the rear respectively, it is one stable truck, the front suspension setup is made for offroad, and the rear is o.k, if you are going to keep the ass leaf, you will need a track bar.
they are hell expensive imo, and parts are a bit thin on the ground, for a truggy it may be a bit big, my suggestion would be to wreck and cut up a hilux, plenty of cheapos and plenty of parts. or make the effy into a cool registered social wheeler.
Who is online
Users browsing this forum: No registered users and 1 guest